People often ask plastic pressure barrel than iron pressure tank is good, this is why?

     A: Because the pressure tank during soldering iron will produce oxidation, while the drum wall is no way for surface coating treatment, as well as general iron born one o'clock to see the water will rust, rusty ferromagnetic that will fall , so that most people want to 3.2G pressure tank when they are asked whether or not in plastic, plastic or plastic if there is a good point to keep the appearance of the plastic does not touch it, so the use of a very short period of time will be In under the influence of temperature and humidity from the inside of the barrel produces rust and paint, that life is shortened because of a rusty appearance but natural to look good.

    Q: Why is the pressure barrel interface using plastic than metal good?

    A: Use the metal fittings and supporting the use of plastic pressure barrel valve, the temperature under the influence of factors such as thermal expansion and contraction resulting plastic sealing performance constantly changing, the joint is prone to leaking. Another inconsistency in the hardness of metal and plastic results in tightening when the ball valve is prone to rupture thereby leaking valve.

    Q: Why is "concave" type interface than the "convex" type of good?

    Answer: "convex" type interfaces biggest flaw pressure tank valve tightened after a large part exposed to the outside, resulting interface is easier to break. Our pressure drums with "concave" type interface, ball valves are to be included within the barrel interface, can play a very good protection, and the use of "concave" type interface Free wrapped with raw materials, the installation more convenient.

    Q: Why is plastic pressure barrel surface with "light" than the "matte" good?

    A: The pressure tank placed generally located under the sink or kitchen cabinets and other concealed places, smooth surface of the "light" designed to clean up the long accumulation of dust simply wipe gently with a damp cloth look, not only technical indicators higher to better ensure that the surface is 100% polypropylene material, get more customers. The matte surface of the "matte" design on the contrary, is not only easy to clean and easy to residual stains, often also mixed some of the other than the addition of polypropylene filler material.

    Product Features:

    ①, outer barrel of imported raw materials synthetic PP (polypropylene), rubber balloon using imported food grade rubber. High pressure, each product manufactured have been 1Mpa pressure test to ensure the user ease of use. Each wading parts are made of food grade material, using high pressure valve core materials, and installation of auxiliary sealing elements, air tightness; right storage tank for 50,000 times charge-discharge voltage endurance life test.

    ②, there are two kinds of material only 3.2G pressure tank, the other 6G's, 11G, 20G, 28G are both plastic, and now people like to use plastic, whether it is domestic or commercial machine machine, if a home machine can be used for the following optional 20G, 50G household water we generally are above standard 11G, and several other options are used, and sometimes it also depends on household use of water so big.